|
Surface Mounted Reversing
Camera & 6" Rear View Monitor
£159.99
** DISCONTINUED **
|
Reverse camera kit suitable for cars, vans, motorhomes, campervans and coaches.
The Discrete Monitor in Rear View Mirror automatically switches from mirror to
colour TFT monitor when reverse gear is engaged. AV Extension leads
are available enabling this system to be fitted to a fixed body vehicle of just about any
length. |
|
CAMSM6 Kit contains:
-
5½
inch Rear View Mirror Monitor
-
Surface Mounted Camera
-
Remote Control for Monitor
-
9 metres of AV cable. Monitor to Camera.
-
Wiring
for vehicle
-
Fitting
Instructions
-
12 month guarantee
|
|
-
Monitor dimensions:
-
Total Height: 102mm
-
Total Width: 250mm
-
Monitor Depth: 40mm without clamps
-
Monitor Depth: 55mm including mirror clamp
-
Clamps onto vehicle Rear View Mirror with
height between 60mm and 90mm
-
Two AV inputs enabling the connection of a
second camera or DVD player
-
Colour: Black
-
Camera dimensions:
-
Height including bracket: 70mm
-
Width including bracket: 80mm
-
Depth including bracket: 90mm
-
Height, camera only: 44mm
-
Width, camera only: 65mm
-
Depth, camera only: 80mm
-
Single AV output & Power socket
-
Case Colour: Black
Wiring
and Installation
The Monitor clamps onto
the existing vehicles rear view mirror, completely covering it and
replacing it's function. The
components are supplied pre-plugged and ready to install, with the
exception of the following that must be connected to the
vehicle's 12 Volt power supply:
Camera Power Supply:
|
|
Rear View Mirror Monitor Power Supply:
-
Blue
Wire - Connect to the Revering light positive feed.
-
Black
Wire - Connect to a negative power supply (ground)
-
Red
Wire - Connect to ignition positive power
supply.
Click on any of the following images to enlarge:
|
Front view of Monitor in Clamp on Rear
View Mirror fitted to vehicle
|
Surface Mounted Camera |
|
Bottom view of Monitor in Clamp on Rear
View Mirror
Back view of Monitor in Clamp on Rear View
Mirror |
Total of 9 metres of AV cable supplied |
CAMS - Camera technical details:
| Image
Pick up: |
1/3" CMOS Colour
OV7910 |
|
Horizontal Resolution: |
380 TV Lines |
| Number
of Pixels: |
NTSC: 510(H) x
492(V); PAL: 500(H) x 582(V) |
| NTSC
Scanning System: |
525 lines, 60
field/sec |
| PAL
Scanning System: |
625 lines, 50
field/sec |
| Sync
System: |
Internal
Synchronization |
|
Electronic Shutter time: |
NTSC 1/60 -
1/100,000 Sec PAL 1/50 - 1/100,000 Sec |
| Usable
Illumination: |
2 Lux(F:2.0), 0
lux with built in Infrared LED |
| IR
Project distance: |
15 metres (18 Unit
infrared LED) |
| IR
status: |
Under 10 Lux by
CDS |
| IR
Power On: |
DS Auto Control |
| Lens: |
Board Lens 3.6mm
|
| Video
Output: |
1.0Vp-p 75ohm |
| Gain
Control (AGC): |
Auto |
| Cable: |
RCA JACK |
| Water
Resistance: |
IP66 |
| Power
Supply: |
12V～
24V DC +-10% 280mA |
|
Display Working Temperature: |
-10
～
+50 RH95% Max |
| CMOS
Camera angle: |
92°
with infrared night vision |
| Weight: |
300g |
 |
All our products
conform to EC standards. |
|
| |
|
![Visa Delta [1258 bytes]](http://ecs2.co.uk/photos/VISD.gif){kind=small}
